•   0091-22-66157017
  •   info@torqbolt.com
  • Home

    25CrMo4: DIN 2510 material code KG

    25CrMo4 (material number 1.7218) is a chromium-molybdenum low-alloy steel listed in DIN 267-13 Table 2 for high-temperature bolting service. Supplied quenched and tempered (+QT), hardness 195 to 240 HV. Minimum service temperature −60 °C; maximum short-term service 500 °C; maximum long-term service 550 °C. At room temperature, +QT, EN 10269:2013 gives a 0.2 % proof strength of at least 440 MPa (d ≤ 100 mm) or 420 MPa (100 < d ≤ 150 mm), tensile strength 600 to 750 MPa and elongation at least 18 %.

    DIN 267-13 properties

    Material symbolKG
    Material number1.7218
    Material name25CrMo4
    Heat treatment condition+QT (quenched and tempered)
    Hardness range (HV)195 to 240
    Minimum service temperature−60 °C
    Maximum short-term service temperature500 °C
    Maximum long-term service temperature550 °C

    Source: DIN 267-13:2007-05, Table 2 (Steels and nickel alloys as in DIN EN 10269 for high and low service temperatures).

    Applicable DIN 2510 parts

    DIN 2510-7:2021-02 changed its designation example to 25CrMo4 (KG): Extension sleeve DIN 2510-7 – D 45 × 80 – 25CrMo4 + QT, or – KG. DIN 267-13 recommends using the same material for the bolt and the extension sleeve.

    Companion DIN 2510 materials

    For mill test certificates (EN 10204 3.1 or 3.2) and quoted lead time on DIN 2510 components in 25CrMo4, email info@torqbolt.com or WhatsApp +91-22-66157017.