24CrMo5: DIN 2510 material code G
24CrMo5 (material number 1.7258) is the chromium-molybdenum steel used in the designation examples of the 1971 and 1974 editions of DIN 2510 Parts 5, 6 and 7, where the code letter G could replace the material name. The revised parts use DIN 267-13 material symbols instead: DIN 2510-7:2021-02 changed its example to 25CrMo4 (KG), and E DIN 2510-6:2012-01 uses 21CrMoV5-7 (GA). G is not a material symbol in DIN 267-13:2007-05, and 24CrMo5 is not listed there or in EN 10269.
Properties (DIN 17240)
DIN 17240:1976 lists 24CrMo5 (1.7258) quenched and tempered, up to 100 mm: 0.2 % proof strength at least 440 MPa, tensile strength 600 to 750 MPa, elongation at least 18 %, and 400 °C as the usual maximum temperature for continuous service (Table 4).
DIN 2510 designation
Example designations from DIN 2510:
- Hexagon nut NF M 30 DIN 2510 - 24CrMo5
- Hexagon nut NF M 30 DIN 2510 - G (using code letter)
- Cap nut AF M 30 DIN 2510 - 24CrMo5
- Extension sleeve D 45 × 80 DIN 2510 - 24CrMo5
Marking: per DIN 267 Part 13. Hexagon nuts and cap nuts are not marked on the bearing face; extension sleeves are not marked on the end faces.
Applicable DIN 2510 parts
- DIN 2510 Part 5: Hexagon Nuts (Type NF, TF)
- DIN 2510 Part 6: Cap Nuts (Type AF, BF)
- DIN 2510 Part 7: Extension Sleeves (Type D, E)
Companion DIN 2510 materials
- 25CrMo4: code KG per DIN 267-13
- 21CrMoV5-7: code GA per DIN 267-13
- 1.4980: code SD per DIN 267-13 (X6NiCrTiMoVB25-15-2 / A-286)
Materials and technical delivery conditions follow DIN 267 Part 13. For mill test certificates (EN 10204 3.1 or 3.2) and quoted lead time on DIN 2510 components in 24CrMo5, email info@torqbolt.com or WhatsApp +91-22-66157017.

